Image 1 of 7
Image 2 of 7
Image 3 of 7
Image 4 of 7
Image 5 of 7
Image 6 of 7
Image 7 of 7
-
The ultimate SuperSwitch stack for the ultimate in performance.
This amazing package consists of TWO of our multi-award-winning dual-shielded twin port SuperSwitch PROs. One is for installation immediately before the streamer and the other is for installation immediately after the router, each including a dedicated custom-made Linear PSU. These units are identical and interchangeable. Post-router installation allows for separation of the audio network from non-audio devices; pre-streamer installation enables the maximum removal of accumulated RFI noise.
The multi award-winning Reiki Audio SuperSwitch is a dual-shielded audiophile network switch optimised for pre-streamer installation.
The SuperSwitch is available in its original twin port configuration and as a 3 port (dual output) model. For optimal performance we advise against leaving open ports, so unless you need the additional connectivity offered, we recommend purchasing a single output (2-port) SuperSwitch.
We commissioned a master of the craft to design the internals of our PRO Linear PSU, a class-leading low impedance design using high quality components to provide the SuperSwitch with stable, clean, low ripple, low noise DC power. This high performance linear PSU will release the true potential of your SuperSwitches.
Echoing the SuperSwitch’s superb aesthetics, our PRO Linear PSU combines class-leading custom-designed low noise circuitry with classic Reiki Audio attention to detail including a beautiful milled aluminium case and no LED’s.
The PRO Linear PSU’s 5mm aluminium top plate perfectly accommodates the SuperSwitch. Together with the copper-lined 5mm aluminium base plate of the SuperSwitch, there is therefore one layer of copper and 10mm of aluminium isolating the SuperSwitch circuitry from the PSU’s circuitry and transformer.
-
The SuperSwitch is available in 2 levels.
Plus: with ultra low noise iFi iPower 2 PSU. With a slot in “tip” to suit your country/region. We will send the iFi slot-in tip suitable for the country of your shipping address unless you tell us otherwise.
Pro: with custom-designed Pro Linear PSU for enhanced performance. We commissioned a master of the craft to design the internals of our Pro Linear PSU, a class-leading low impedance design using high quality components to provide the Superswitch with stable, clean, low ripple, low noise DC power to release the true potential of your Superswitch. Echoing the Superswitch’s superb aesthetics, our Pro Linear PSU combines class-leading custom-designed low noise circuitry with classic Reiki Audio attention to detail including a beautiful milled aluminium case and no LED’s. The Pro Linear PSU’s 5mm aluminium top plate perfectly accommodates the Superswitch; together with the copper-lined 5mm aluminium base plate of the Superswitch, there is therefore one layer of copper and 10mm of aluminium isolating the Superswitch circuitry from the PSU’s circuitry and transformer.
-
Gigabit switch
10mm aluminium case, copper-lined
Vibration damped circuit board
Case grounding post (4mm spade)
Requires 5v DC (2.1mm barrel)
Fully linear PSU delivers stable, clean, low ripple, low noise DC power
10mm aluminium case
Case grounding post (4mm spade)
5v DC output via GX16-2 socket (for Reiki Audio devices)
-
SuperSwitch
Height: 45mm
Width: 182mm
Depth: 110mm (with grounding post)Weight: 850g
Pro PSU
Height: 70mm
Width: 250mm
Depth: 148mm (with grounding post)Weight: 2.75kg
-
We assemble by hand and try to maintain sufficient stock of most models for immediate despatch; if we do not have stock of your chosen model(s) we will let you know within 24 hours. Non-stock orders should be shipped within 3-4 weeks. For more information please visit our terms and conditions page.